Waterous AQUIS ULTRAFLOW, Installation And Operation Manual

Page: 42 / 56

42
|
56
Safety Introduction Product Overview Installation Operation Maintenance
System Screen—Buttons
20%
50%
80%
20%
50%
80%
98
GPM
170.0
2000
64781
1943.4
112.0
< GAUGE SOLUTION >
45
4,000
PRESSURE
RELIEF
DECK GUN 8”
REAR DRIVER /
DECK GUN 5"
PASSENGER 6"
DRIVER 6”
FRONT / REAR
CROSSLAY 1~3/4”
REAR PASSENGER
2.5"
#1 / #2 DRIVER
2~1/2”
#1 / #2
PASSENGER 2~1/2”
4
2
1
3
6
8
8
6
7
5
9 11
10
Use the illustration and definitions to understand the
buttons on the system display. The system screen
displays the current and total flow of water and
concentrate across all DLAs. It also monitors and
controls the refill, transfer, and relay processes.
1 This is the selected concentrate source, and is
determined by a signal provided to the system.
2 This enables the refill process when the
concentrate source is set to auxiliary.
3 Press and hold this button to manually prime
the concentrate pump.
4 This enables the relay or transfer process and
operates as follows:
• The transfer process is available when the
concentrate source is on-board.
•
The relay process is available when the
concentrate source is auxiliary.
5 This is the relay or transfer rate set-point slider.
Adjust this to set a general value.
6 This incrementally adjusts the relay or transfer
rate set-point. Adjust this to fine-tune the value.
7 This is the refill rate set-point slider. Adjust this
to set a general value.
8 This incrementally adjusts the refill rate set-
point. Adjust this to fine-tune the value.
9 This button navigates you to the DLA gauge
screen.
10 This is the screen indicator. It shows you the
screen navigation options.
11 This button navigates you to the solution
screen.