manualshive.com logo in svg

Waterous AQUIS ULTRAFLOW, Installation And Operation Manual

Share
Download
Waterous AQUIS ULTRAFLOW Installation And Operation Manual Download Page 26

26 

|

 56

Safety

Introduction

Product Overview

Installation

Operation

Connecting to the Tellurus HMI—External Keyboard and USB Drive

1

2

3

Use the illustration and instructions to connect to 

the Tellurus HMI with a keyboard and USB drive. 

Use the USB drive to download and save the 

current configuration file or to upload a new or 

restore to a previous configuration.
To transfer configuration files, you will need the 

following:

• 

A USB hub to connect the HMI to the keyboard 

and USB drive.

• 

A USB keyboard to navigate through the menu.

• 

A USB drive to store and retrieve configuration 

files.

Note:

 Only use components with a USB standard of 

2.0 or higher.

1 Plug in the USB hub to the USB connection on 

the HMI.

2 Plug-in the USB drive to the USB hub if you are 

transferring files.

3  Plug-in the USB keyboard and mouse to the 

USB hub. 

Summary of Contents for AQUIS ULTRAFLOW

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands