Ecostream
Manual
Page 6 - Revision: 11-13-2020
ECOSTREAM FEATURES AND BENEFITS
Cold and Hot Water
Counter Top and Tower Models come standard with Cold, Hot, and Ambient Water Selections
to meet a wide range of customer demands. Cold Water Temperature is adjustable.
High Volume Storage and Water Capacity
Tower Model has 4 liters of Cold Water Capacity and 1.6 Liters of Hot Water Capacity.
Counter Top has 2 liters of Cold Water Capacity and 1.6 Liters of Hot Water Capacity.
BioCote® Anti-Microbial Protection
Certain plastic, silicon, and painted surfaces surrounding the dispensing areas and
drip tray are infused with an exclusive additive called BioCote®. BioCote® provides
an effective barrier against microbes like bacteria and mold, which may cause odors
or staining
Large Dispense Area with Recessed Faucet
8.5 inch dispense height with BioCote® recessed faucet to protect from cross-contamination.
Leak Prevention
ECOSTREAM
Water Treatment Systems
are
supplied with an extra solenoid to provide
redundant protection and reduces accident potential.
Child Safeguard
The
ECOSTREAM
Water Treatment System
with Hot Water requires the Hot Water selection to
be pressed until the Red-Light flashes, followed by the Main Dispense button for Hot Water and
defaults back to the Cold selection after 3 seconds of inactivity to prevent accidental dispensing
of Hot Water.
In-Tank UV Purification
Industry leading In-Tank UV Purification prevents the growth of biofilm within the Stainless
Steel Cold Tank.
Auxiliary Port
Auxiliary Port to feed Coffee Machines or other Appliances on the Counter Top Model.
Energy Saver
The
ECOSTREAM
Water Treatment System
comes from the factory with Energy Saver active.
For the Ecostream to comply with Energy Star, the energy saver must come activated (ON) from
the factory. When no buttons are pressed on the front user interface panel, the machine will
automatically enter energy saver mode, and the heater to the hot tank will be turned OFF.
When any one of the front buttons are pressed while the system is in energy saver mode, the
Ecostream will exit energy saver mode, and the hot tank will begin heating water. The hot
water tank will be at set temperature within 10-minutes after exiting energy saver mode.
Energy saver can be disabled by adjusting DIP switch #4, shown on Page 50 of this manual.
While the unit is active, the middle green LED will be lit. When it has entered energy saving
mode, the middle green LED will NOT be lit.
