WS2H, WS2HF, and WS3 Manual
Page
23
EXPANSION SETUP SCREENS
Accessed by pressing NEXT and DOWN simultaneously for >3 seconds and selecting
EXPANSION SETUP from the Main Menu.
EXPANSION SETUP 1
EXPANSION SETUP 1
Select the expanison port, 1 or 2, that you will modify.
EXPANSION SETUP 2
EXPANSION SETUP 2
Select the installed expansion board or OFF if no expansion board is installed.
EXPANSION SETUP
2A
EXPANSION SETUP 2A
If RELAY MODULE was selected from Expansion Setup 2, select which relay to modify.
EXPANSION SETUP
2B
EXPANSION SETUP 2B
Select how the relay should function or OFF if the relay will not be used.
OFF
- Relay is not used
REGEN
- The relay is energized while the control is regenerating
SERVICE VOLUME
-The relay is energized, during service only, every specifi ed amount of
volume used and for a specifi ed amount of time
TIME
- The relay is energized based on a set amount of time after the start of regeneration
and will stay energized for a specifi ed amount of time
REGEN CYCLE
- The relay is energized based on the start of a specifi ed cycle and will
stay energized for a specifi ed amount of time
SYSTEM VOLUME
- The relay is energized, at a specifi ed volume, based on combined
volume usage of all units in the system and stays energized for a specifi ed time. Only
available on the LEAD unit of a system.
REGEN VOLUME
- The relay is energized, during service & while in regen, every specifi ed
amount of service fl ow and for a specifi ed amount of time
MAX DAILY VOLUME
- The relay is energized, based on a units usage, at a specifi ed daily
volume to signal a usage alarm. “HIGH VOLUME ERROR” fl ashes on the screen while unit
continues to operate as normal. Pressing any button resets the relay and returns the unit to
the user screens.
MAX SYS DAILY VOLUME
- The relay is energized, at a specifi ed amount, based on
combined volume usage of all units in the system. “HIGH VOLUME ERROR” fl ashes on
the screen while unit continues to operate as normal. Pressing any button resets the relay
and returns the unit to the user screens. Onl available on the LEAD unit of a system
ERROR
- The relay is energized to signal an error condition
STANDBY
- The relay is energized based on the units Standby status. Relays could be
used to control external valving or signaling a units Online status.
