6
2.
Configuring the camera function
The function of WAT-2200 Mk-2 can be set by the RC-02 (remote control) or RS232. Utilize
the option RC-02 (remote control) to set function through OSD (On Screen Display) menu.
By RS232, through communication by the VISCA/Pelco-D/Pelco-P protocol, it is able to set
the camera function through not only the OSD menu same as RC-02 but also without
displaying the OSD menu. Utilize the option CB-03 (serial communication cable) for the
communication. Connect either the RC-02 or CB-03 to the REMOTE terminal on the rear of
the camera. You cannot use both these at the same time.
2.1.
RC-02 (Remote Control)
Operate the OSD menu by the RC-02.
Connect the RC-02 to the REMOTE terminal on the rear of the camera. Remote control unit
providing access to adjustments, settings the functions on the OSD menu.
Figure 1. RC-02 (remote control)
1. UP, 2. DOWN
: Cursor control for selecting the OSD menu items.
3. LEFT, 4. RIGHT
: Change the settings or value on the OSD menu.
5. ENTER
: Open the OSD menu. Execute the selected item or function.
①
UP
③
LEFT
④
RIGHT
②
DOWN
⑤
ENTER