25
[Setting Method of OSD]
-
Set digital ZOOM RATIO: Operate LEFT/RIGHT while the cursor is on RATIO
*Press “ENTER” to move the cursor to the “POSITION”.
Figure 15. ZOOM
-
Set the position of PAN/TILT:
Operate UP/DOWN/LEFT/RIGHT while the cursor is on POSITION
*Press “ENTER” to move the cursor to the “RETURN”. Press “ENTER” to return to the
previous screen while the cursor is on to the “RETURN”.
Figure 16. PAN/TILT
[Setting Method of RS232]
(See the “5.RS232 Command List” for the communication commands.)
-
Send the command turning DZOOM=ON first.
-
Specify the ZOOM RATIO by the ZOOM command.
ZOOM command = 0x81, 0x01, 0x04, 0x46, 0x00, 0x00, 0x0p, 0x0q, 0xFF
*See “Table 15” for the interrelationship between the ZOOM command setting value and
ZOOM RATIO.
-
Specify the position of PAN/TILT by the PAN, TILT position command.
-
The PAN/TILT position moves from the current position by sending PAN-Left, PAN-Right,
TILT-Up, TILT-Down commands.
ZOOM
ENTER
PAN/TILT
ENTER
