Watec WAT-2200Mk-2 User Manual Download Page 23

Page: 23 / 61

3.4.9.

DISPLAY FUNCTION

Open the setting menu by the ENTER operation while the cursor is matched with

“DISP.FUNCTION”. Default: FREEZE = OFF, MIRROR = OFF, IMAGE EFFECT = OFF

Table 14. DISPLAY FUNCTION

Item

Value

Description

FREEZE

OFF

Turn off FREEZE.

Turn on FREEZE.

MIRROR

OFF

Turn off MIRROR.

MIRROR

Invert to right and left of the image.

V-FLIP

Invert to up and down of the image.

BOTH(H/V)

Invert to up, down, right and left of the image.

IMAGE

EFFECT

OFF

Turn off IMAGE EFFECT.

NEGATIVE

The negative-positive reversal on the contrast and

color of the image.

GREY

Make the image to achromatic color.

REDDISH-1 - 4

Make the image to red monochrome.

Color density range: 1-4

BLUISH-1 - 4

Make the image to blue monochrome.

Color density range: 1-4

GREENISH-1 - 4

Make the image to green monochrome.

Color density range: 1-4

3.4.10.

Reset Picture Adjust (DEFAULT)

PICTURE ADJUST: Restore the settings in the menu to factory default.

Summary of Contents for WAT-2200Mk-2






























































Search results

Summary of Contents for WAT-2200Mk-2

Reviews:

Related manuals for WAT-2200Mk-2

Brands by name

Popular brands

Watec WAT-2200Mk-2, User Manual

Search results

Summary of Contents for WAT-2200Mk-2

Reviews:

Related manuals for WAT-2200Mk-2

Brands by name

Popular brands