33
⚫
MOTION VIEW
Switch ON/OFF of displaying the MOTION DETECT. Default: ON
⚫
VISCA ALARM
Switch ON/OFF of the VISCA command output of the MOTION DETECT result.
Default: OFF
The MOTION DETECT result will be sent as the response command like below.
Response to the MOTION DETECT result = 0x90, 0x07, 0x04, 0x1B, 0xXX, 0xFF
The XX part shows the detected area. The low-order corresponds to the detected area,
and it becomes to 1 when detected.
Example 1: Only when the area1 was detected = 0x90, 0x07, 0x04, 0x1B, 0x01, 0xFF
Example 2: All areas (1-4) were detected= 0x90, 0x07, 0x04, 0x1B, 0x0F, 0xFF
bit of XX part
7
6
5
4
3
2
1
0
Detected area
-
-
-
-
area4
area3
area2
area1
⚫
DEFAULT
Restore the MOTION DETECT setting to the default.
3.5.5.
Digital Image Stabilizer (DIS)
Reduce the horizontal and vertical blur and/or vibration of the subject.
The angle of view is changed due to the correction by zooming.
Cannot use together the “DZOOM” and “DIS”.
Default: OFF
OFF
Turn off the “DIS”.
ON
Turn on the “DIS”.
