Watec WAT-2200Mk-2 User Manual Download Page 14

Page: 14 / 61

3.1.6.

AE BRIGHT

Set the target brightness while the AE MODE is AUTO or SHUT FIX.

The higher value is set, the brighter it gets when the AE is converged.

The setting value range is 0-10.

Default: 6

3.1.7.

DC IRIS

Open the setting menu by the ENTER operation while the cursor is matched with the DC

IRIS. The following settings are configurable in the menu.

Default: MODE = OPEN, PWM OFFSET ADJ = 127, IRIS SPEED = 3

Table 7. DC IRIS

Menu Item

Value

Description

MODE

AUTO

Control the DC iris to the AE BRIGHT value.

The DC iris works while the shutter speed reaches the max.

value (when the subject is bright).

OPEN

Fully open the DC iris.

Fully close the DC iris.

PWM

OFFSET

ADJ

– 255

(127)

Set the easiness of the start moving the DC iris.

When the value is large, it starts to move soon.

Turn the power off of the camera after changing the setting

and power the camera back on.

IRIS SPEED

– 5 (3)

Set the speed between the start moving until convergence of

the DC iris. When the value is large, it converges quickly.

DEFAULT

Restore the DC iris settings to the factory default.

Summary of Contents for WAT-2200Mk-2






























































Search results

Summary of Contents for WAT-2200Mk-2

Reviews:

Related manuals for WAT-2200Mk-2

Brands by name

Popular brands

Watec WAT-2200Mk-2, User Manual

Search results

Summary of Contents for WAT-2200Mk-2

Reviews:

Related manuals for WAT-2200Mk-2

Brands by name

Popular brands