10
Figure 5. Shift to Each Setting Menu
[Change Settings]
Use the “UP/DOWN” on the RC-02 (“Up/Down” command of the RS232) to move the
cursor to select each OSD menu item, and press ”LEFT/RIGHT” (“Left/Right” command of
the RS232) to change the setting of the item that the cursor is matched.
Figure 6. Change Settings
Precautions
*Save behavior of settings
The set value is saved immediately on this camera as soon as the settings are changed
by the OSD. The settings retains even when the power of the camera is turned off.
(*Excluding the DZOOM and function not supported to be saved.)
*To retain the DZOOM function, operate the OSD/RS232 (DZOOM SAVE).
*The function not supported to be saved is below. See the “3. Description of Each Function”
for the detail of the function.
PICTURE ADJUST
=> DISP. FUNCTION
=> FREEZE
FUNCTIONS
=> WDR
=> FRAME VIEW SEL
Press
“ENTER” to open
the setting menu
To go back to the previous menu,
move the cursor to the "RETURN",
and press “ENTER”
Change settings
by
“LEFT/RIGHT”
