CHAPTER 1: A Tour of the WatchGuard Firebox Vclass Security Appliances
6
Vcontroller 3.2
Ready
The
Ready
LED will blink when the appliance is
powering up. It will be steadily lit when the
appliance is ready for network traffic.
Features of the appliance’s back panel
Data interfaces
Two Ethernet interfaces (RJ-45 connectors)
labeled
0
and
1
, act as the primary data
interfaces.
Incorporated into each Ethernet interface
are two indicator lights labeled
10
and
100
.
These LEDs indicate (1) a connection to a
hub or direct-connect workstation is
active, (2) the speed of the link (10 Mbps or
100 Mbps Ethernet), and (3) that traffic is
being transmitted.
When a cable is first plugged into an RJ-45
interface, either the 10 or the 100 LED
should be lit. This indicates that there is a
successful link between the Firebox V10
appliance and the network or a computer.
If either light doesn't turn on, check that
the cable is securely connected to the
proper interface on each end.
1install_guide.book Page 6 Friday, June 7, 2002 1:10 PM
