14
Configuration via the SpecConnect Web Portal
1. Log in to your account at www.SpecConnect.net.
2. Open the Retriever configuration page by
clicking the “Equipment” option in the upper left
corner. Click on the “Configure” button for the
Retriever to bring up the Configure WatchDog
screen.
3. In the “Configure Retriever” screen (fig. 5), set the Retriever
parameters. The latitude, longitude & altitude (optional) can be
keyed in. Alternately, if the pindrop icon is clicked, a map image
will be displayed that allows you to locate the device. The logging
interval is how often a Pup sends data to the Retriever. The
Upload interval is how often the DataScout reports records to
SpecConnect. In most installations, it is recommended for the
logging interval to match the upload interval. See
Data Logging
& Storage
(p. 24) for details on the logging and web upload
intervals. Click “Save” to store any changes.
4. Return to the equipment list and open the first Pup
configuration page.
Figure 5. SpecConnect Retriever Configuration Screen
