ADDITIONAL INSTRUCTIONS
47
6
© WASP S.r.l.
8 ADDITIONAL INSTRUCTIONS
8.1. General warnings
The reading of this chapter assumes, in order to use the machine safely, the knowledge of the contents of
paragraph 1.5 “General safety warnings”.
Furthermore, the specific requirements for safe interaction with the machine, related to this chapter, are detailed
in the following paragraphs.
ATTENTION:
The operations related to these activities must be performed by authorized and professionally
qualified personnel.
ATTENTION:
During operations, the operator must wear all the necessary Personal Protective Equipment (PPE).
8.2. Decommissioning and dismantling
In the event that the machine should be taken out of service for a prolonged period while waiting for the
dismantling, it is advisable to indicate its presence, preventing unauthorized access to the machine. Before
starting the dismantling operations, it is necessary to create around the machine a sufficiently large and orderly
space in order to allow all the necessary movements without risk created by the surrounding environment.
ATTENTION:
Observe the requirements imposed by the laws in force and by the authorities in charge of the country
in which the demolition takes place.
If the mechanical parts have to be dismantled, keep in mind that they consist of different types of material. The
user is therefore obliged to consider disassembling the machine in its parts in order to facilitate a differentiated
disposal aimed at recycling the various materials and products, in full compliance with all the regulations in force
on the spot.
NOTE:
The dismantling of the machine must be performed by a qualified mechanical maintenance technician.
ATTENTION:
Before carrying out any type of disassembly on the machine, make sure that the power supply is
disconnected.
ATTENTION:
Danger crushing hands, falling materials, cuts and abrasions. Obligation to use clothing appropriate
to the operation to be performed.
Fig. 7.3.6 - Support bearing lubing
Fig. 7.3.4 - Mixer bearing lubing
