32
First use of the machine
6
© WASP S.r.l.
6.4. Loading of material
ATTENTION:
The machine is not capable of working any mixture. For the compatible materials check the paragraph
2.3 Technical Data.
NOTE:
The consistency of the mixture is crucial for the proper functioning of the system.
Dough with too high consistency can block the system by overstressing the mechanics.
Mixtures that are not homogeneously mixed can tend to separate from water.
The presence of aggregates, grog, fibers depending on their nature and size can compromise the
correct functioning of the system.
To perform the loading of the material proceed as described:
1. Turn on the machine using the green button on the global switch. (Fig 6.4 a)
2. After preparing a suitable mixture produce some cylindrical shapes of the average diameter of 5 cm. (Fig 6.4 b)
3. Feed the tank by pushing the cylinders one by one inside the material intake. (Fig 6.4 c)
The cylinder must be cut in half by the safety protection.
This is:
•
the safest way of operating
•
preventing the material fed from sticking to the walls of the intake
4. Leave some time to the machine to degas and compress the mixture through the tank before evaluating the
level of the material.
The maximum material capacity is reached when the mixture is close to the upper cut element as displayed in Fig
6.4 d
