18
2
© WASP S.r.l.
2.3. Technical data
All WASP machines and 3D printers are characterized by considerable robustness and working precision.
Their mechanics allows for greater precision and stability, guaranteeing greater production speeds.
A further advantage is the possibility of restarting the production of the piece from the point where it may have
been interrupted for some reason.
General features
Length
32 cm
Width
36 cm
Height
90 cm (158 cm with basement)
Approximated weight
60 kg (30kg maximum weight of a single component)
Noisiness
< 70 db (A)
Mechanical features
Frame and cover
Metal sheet and stainless steel
Movement
Rotation on thrust bearing and Igus bearings
Motors
ISV57 brushless
Electrical features
Input
220/240 V - 50/60 Hz (110 V on request)
Absorbed power
450W
Use features
Environment of use
15-30 °C
Warehouse
0-30 °C
Continuous feeding informations
Technology
LDM
Max output
30 kg/h (measured with earthenware and 8mm nozzle)
Compatible nozzles
4, 6, 8 mm
Interface
Built-in dual PWM controller/synchronous cable control*
Tank capacity
11 l
Suitable materials
Earthenware, Stoneware, Porcelain, mixtures
*only supported with compatible Delta WASP 40100 Clay models. Contact [email protected] for more info
