Page 4
63398 D2
Figure 3, YJ and TJ VEHICLES, PASSENGER’S SIDE SHOWN,
DRIVER’S SIDE OPPOSITE, TJ FRAME STIFFENING BRACKETS
SHOWN, YJ HAS SAME SPACERS AND HARDWARE, BUT WITH
DIFFERENT FRAME STIFFENING BRACKET.
5. Install the tire carrier to bumper. This must be done before tightening of the eight
frame bolts.
If installing on TJ model
, remove the plastic license plate mount from
the vehicle, it will be trimmed slightly in the bottom corner later.
If installing on TJ
and YJ models
, it is necessary to remove all of the factory rubber tailgate bumpers
except the upper one on the driver’s side. Place the nylon washer over the post in
the bumper and slide it all the way down. Place the round tube end of the tire carrier
on the post sticking up out of the passenger’s side of the bumper and slide it all the
way down.
See Figure 4
.
