©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
96551A2
7. Remove the bolt located underneath the frame rail inside
the hitch mount.
Retain bolt - as you will be reinstalling later using the
nut assembly supplied in this kit.
The bumper is now unbolted.
NOTE: To be able to remove the bumper with the frame
brackets, you will need to lift the back of the pickup box/
bed.
8. Un-bolt the box’s rear bolts (one on each side of truck). You
will need an extension to reach the bolt.
9. Next you will loosen the box’s front bolts (located about two
feet toward the front of the vehicle from the rear bolt just
removed).
There will be a large hole that you can insert a socket and
extension through to loosen the bolt (one on each side).
10. Repeat steps for other side.
11. With assistance, carefully remove bumper.
12. Using the nut assembly (B2), reinstall the bumper bracket
bolt which was previously removed in step 7.
Repeat for each side.
Go to page 10 for your WARN Bumper
installation instructions.
Remove
Figure 7
Figure 8
Figure 9
Figure 9
