©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
13 96551A2
12. Insert license plate lamp plug as shown in figure 11.
13. Secure with one screw (B1).
14. Plug in license plate lamp harness.
15. Repeat steps for other side.
16. If applicable, install the stock sensor retainers into new
bumper.
17. From behind bumper, route the sensor harness through
frame bracket and insert in sensor retainer.
NOTE: If your vehicle did not come equipped with rear
sensors, use the supplied plugs to cover sensor locations.
Screw
License Plate
Lamp Plug
Figure 11
Sensor retainer
Figure 12
Figure 13
