©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
14 96551A2
18 a. Slide bumper into place, lining up holes in bumper
brackets to mounting holes in vehicle frame.
b. Install mounting hardware (loosely). See figure 14 and
refer to page 3.
c. Center bumper.
d.
Tighten all hardware
.
19. Install spare tire rod locking cover and finish securing any
loose wiring with zip ties provided.
20. Install the 8 panel nuts (each side) over light bezel holes in
light cut out (see exploded view on page 3).
21. Install light bezels and secure using the stainless hardware
provided in your kit.
22. Installation is now complete.
Figure 14
Figure 15
Figure 16
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
