©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
96551A2
I N S T A L L A T I O N I N S T R U C T I O N S
The following steps are for the removal of
the OEM bumper for the 1500:
1. Remove rear license plate.
2. From underneath the rear bumper, unplug the trailer
connector wire harnesses.
3. Unplug license plate light wire harness and back up sensors (if
equipped).
NOTICE
Be careful when removing sensors and sensor
retainer from bumper as to not damage
.
Figure 1
Figure 2
Figure 3
