©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
9
96551A2
11. Approximately two feet in front of the bolts you just
removed, located on the outside of the frame, is the forward
box mounting bolt.
12. Remove bolt to allow the pickup bed/box to raise.
13. Repeat for other side.
14. Find the rib or rail, underneath the pickup box/bed and use
floor jack with blocks to slightly lift the box (approximately.
1/2 inch).
15. With assistance, carefully remove bumper.
16. Using the nut assembly (B2), reinstall the bumper bracket
bolt which was previously removed in step 7.
Go to page 10 for your WARN Bumper
installation instructions.
Remove
C A U T I O N
• Always
use assistance when moving or lifting heavy parts.
N O T I C E
• Only lift the bed approximately a 1/2 inch, only to gain enough clearance to remove the
stock bumper brackets from the frame rails. Lifting too much can damage the pickup box or
other components.
Figure 7
Figure 8
