©2015 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
96551A2
I N S T A L L A T I O N I N S T R U C T I O N S
The following steps are for the removal of
the OEM bumper for the 2500/3500:
1. Remove rear license plate.
2. From underneath the rear bumper, unplug the trailer
connector wire harnesses, license plate and sensor wiring
harness (if applicable).
NOTICE
Be careful when removing sensors and sensor
retainer from bumper as to not damage
.
4. Remove spare tire rod lock.
NOTE: It might be easier if you remove the spare tire at
this time in order to lift the bed of the pickup, however; if
you have the right size blocks it may not be necessary.
Figure 1
Figure 2
Figure 3
