background image

REMOTE CONTROL & CONTROL ACCESSORIES (OPTIONAL)

Product Code

Product Name

Description

Product View

153.11.660.600046

MLC 27-Cascade Modul

The Viwa 50 and Viwa 65 control units allow the boilers to be operated 

in cascade.

153.11.660.600047

MLC 30-Multi Zone Module

This unit controls the Low Temperature (District Heating) Zone (circuit 

with mixer valve) of the Viwa 50 and Viwa 65 boilers.

153.11.660.600049

QAZ36-Boyler / Hydrolic 

Separator Sensor 

(Immersion Type)

It is a immersion type sensor used to measure the temperature of a Hot 

Water Storage Tank or an Hydrolic Separator and used to transmit this 

information to the boiler.

153.11.660.600050

QAD36-System Flow Sensor 

- Strap-on Temperature 

Sensor

A clamp-type sensor that provides temperature measurement over the 

pipe at the outlet of the balance vessel. It is used to measure the flow 

temperature of the low temperature zone in double-zone systems.

152.11.003.000004

Three Way Motorized Valve 

Set

It is an accessory to be used when a hot water storage tank is 

connected to a single boiler and it is requested to be controlled by a 

3-Way Valve.

This product "hot water storage tank or Hydrolic Separator Sensor" 

must be used with.

153.11.660.600001

WDHS-01-Outside (Air 

Temperature) Sensor with 

Cable

It is the sensor that notifies the maximum flow water temperature by 

measuring the outside air temperature. It is necessary to use one for 

fuel economy in single boiler or cascade system.

Product Code Description

Product View

WT-07

Minimal dimensions and reduced 4-button keypad with modulated operation according to room 

temperature, weekly programming, adjustment of hot water and boiler malfunction code display on 

the screen and reset it. 8 programs per day can be made for heating and hot water usage (hot water 

storage tank).

WT-08

Optimum size and each function are assigned separately with 10 buttoned keypad, the control 

connected with the winch cable has modulating operation according to room temperature, weekly 

programming, setting hot water, displaying boiler fault code on the screen and resetting it. Six 

programs per day are available for heating and hot water heating (hot water storage tank).

WT-RF03

Optimum size and each function are assigned individually with 10 buttoned keypad, and the 

wirelessly connected control room has modulating operation according to room temperature, weekly 

programming, setting of hot water and displaying and displaying the boiler fault code on the screen. 

Six programs can be made daily for heating and hot water heating (hot water storage tank).

System Accessories 

Remote Control with Room Thermostats

Look at The Technical Catalogue for detailed information.

21

Summary of Contents for VIWA 50





































Reviews: