1
1 KEY INFORMATION
The appliance is rated to IP45 and has a weather-proof housing suitable for both internal and
external installation.
The appliance is supplied with a flue terminal which may need to be extended or adapted
depending on the installation situation. Extension pieces, bends and bracketry can be
purchased from Warmflow stockists. The appliance is also fitted with a flue draught stabiliser.
The wood pellet fuel is loaded into the integrated hopper located at the rear of the appliance
(see Figure 1 above). The hopper door must be kept closed at all times when not refilling. An
interlock switch is fitted to the hopper door meaning the appliance will not operate if the hopper
door has been left open.
The service access lid is located on top of the appliance and should only be removed once
power has been isolated using the isolator switch. The service lid and side panels give access
for plumbing, servicing and maintenance.
The combustion door is located behind the green coloured front casing door and has an
interlock fitted to ensure the door cannot be opened during firing of the appliance.
Knockouts in the casing are provided at a number of locations to aid the plumbing installation.
The installer wiring panel is located behind the green coloured front casing door.
Figure 1: Wood Pellet Boiler Overview.
