10
Alarms:
Selecting the alarms menu enters the alarms display. This can also be entered at any time by
pressing the
‘Display active alarms’ key. The screen shown in Figure 10 will be displayed
when no alarms are present.
When an alarm is present, the
‘Display active alarms’ key will flash red. Pressing the
flashing key or entering the alarm menu will then display one or more active alarms or faults.
The ‘Down Arrow’ or the ‘Up Arrow’ key can then be used to scroll through the alarms.
Refer to Section 5 for more information on the alarm messages that can be displayed and the
appropriate action to take in each case.
Cleaning:
Selecting the cleaning menu option enters the cleaning status display. A typical example of a
cleaning status is shown in Figure 11.
When viewing the cleaning status display, press the ‘Enter’ key to proceed to cleaning the
appliance. The full cleaning procedure detailing the necessary steps to correctly clean the
appliance can be found in Section 2.5.3.
Figure 10: Alarms Screen.
Figure 11: Cleaning Status
