Congratulations
You have just purchased a new type of 3D printer using Direct UV-light Printing (DUP)
technology. This is a newly applied-for method of LCD image creation allow controlled UV
light get through the LCD screen which hardens liquid with the light from an UV light source.
This revolutionary system is a new way of printing that uses normal UV light as the energy
providing source to initiate the free radical polymerisation necessary to change the liquid
imagepac resin into your hardened object.
The principle behind your printer
There are two surprising advantages of this new DUP technology:
i) We can use high resolution low cost LCD screens that are widely available as monitors,
tablets, mobile phone and televisions providing phenomenal value for money, which we
pass directly onto you.
ii) The energy used by Duplicator 7 printers is again an order of magnitude lower than
used in comparable systems. This is good for your energy bills and the ecology, but there
is a huge performance advantage in that there is no unnecessary energy created. All of the
available photons strike photoinitiators and hand over their energy. In comparable Digital
Light Projector and laser systems there is a lot of excess energy which can lead to over-cure.
Safety Information
Read the instructions carefully. Keep this document for future reference. Follow all warnings
and instructions marked on the product.
Observe the following guidelines when connecting and disconnecting power to the external
power supply unit:
- Install the power supply unit before connecting the power cord to the AC power outlet.
- Unplug the power cord before removing the power supply unit from the printer.
- This machine is very quiet in operation.
˚ŷƼsNjǼsŸŘǼEĶsŸNjʪǼʰǣǼEĶsǣȖNj¯OsʰsŘǣȖNjÞضǼÌǼǼÌsŎOÌÞŘsOŘŘŸǼ¯ĶĶŘ_Þǣ
level.
- Do not operate outdoors.
- Do not allow resin or any liquids to get inside the chassis, wipe up any liquid spills
immediately.
- Store the printer in its original packaging when not in use.
- Disconnect the printer from AC before storage or when not used for a long period of time.
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator 7
5
