Detailed Creation workshop software instructions
System Compatibility
Creation Workshop is a .NET 3.5 application written in C#. This is native to the Windows
Operating System, but it also runs on many versions of Linux/Posix using the Mono
Framework http://www.mono-project.com/Main_Page . You will need to download and
install Mono when using Creation Workshop on a Linux-based system. Windows users may
need to run the application as Administrator.
Main screen
NĶÞOĨǼŸŸƼsŘʩĶsǣÞŘŸŘsŸ¯ǼÌs¯ŸĶĶŸɠÞض¯ŸNjŎǼǣʲʳǢǻĵʰʳŷDğʰʳˢ^ǢŸNjʳō®ʳɳŸȖ
OŘĶǣŸŸƼsŘǣOsŘsʩĶsǣɠÞǼÌǼÌsʳNɟǢsɮǼsŘǣÞŸŘʳ
NĶÞOĨǼŸǣɚsǼÌsOȖNjNjsŘǼŸEĠsOǼǣʳǢǻĵŸNjʳNɟǢʩĶsʳǻÌsʳNɟǢ¯ŸNjŎǼĶĶŸɠǣ
you to prepare a scene to be printed repeatedly in the future, together with
supports and positioning.
Click to start the connection between your computer and your Duplicator 7
3d printer. Once the button is grayed out, this means that the printer is
connected.
Click this button to disconnect your printer from the computer. If the button is
grayed out, it means that the machine is currently disconnected.
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator 7
13
