Prepare the Duplicator 7 for printing
Now you have your printer installed and configured. Please read these software
instructions to understand the different settings before starting.
ĵsǼ˅ǣǣǼNjǼEɴƼNjÞŘǼÞضǼÌsʩNjǣǼŸEĠsOǼȖǣÞضǼÌsÌNj__ɴĶÞ¶ÌǼNjsǣÞŘŘ__ŸǼÌsƼNjÞŘǼŸȖǼǼǼÌs
ĶŸɠsǣǼNjsǣŸĶȖǼÞŸŘǣŸǼÌǼǼÌsǼsǣǼ_ŸsǣŘ˅ǼǼĨsǼŸŸĶŸŘ¶ʳɳŸȖɠÞĶĶʩŘ_ǣŸŎsǼsǣǼŸEĠsOǼǣʹǢǻĵ
ʩĶsʺÞŘǼÌs¯ŸĶ_sNjǣǣȖƼƼĶÞs_ɠÞǼÌǼÌsǣŸ¯ǼɠNjsʳ
1. Switch on your computer and the two switches on the Duplicator 7. Open the
software and load an object (STL, OBJ or AMF).
2. With the object loaded and located in the build area check the settings of the
ƼNjÞŘǼÞضƼNjŸʩĶsʳµŸǼŸǼÌsˆNŸŘʩ¶ȖNjsˇǣONjssŘŘ_ŸƼsŘǼÌsˆNŸŘʩ¶ȖNjsǢĶÞOÞض
ƻNjŸʩĶsˇǼEʳǢsĶsOǼǼÌsƼNjÞŘǼÞضƼNjŸʩĶs¯NjŸŎǼÌsˆōOÌÞŘsƻNjŸʩĶsǣˇĶÞǣǼǼÌǼŎǼOÌsǣ
your resin and desired resolution for example “Hard Daylight 100micron” or
“Standard Daylight 100micron”.
ˢʳǢsǼǼÌsɚĶȖsǣÞŘǼÌsˆǣsǼǼÞضˇʩsĶ_ǣǼŸʲ
- layer thickness = 0.100 mm,
- exposure time = between 18.000 and 22.000 ms
- for other resins and resolutions check the exposure times stated
- exposure time for bottom layers = between 100.000 and 120.000 ms
- number of such bottom layers = between 3 and 5
These settings can be adjusted depending upon the complexity of the desired object. Finally
click “Apply Changes” to save if you had to change any values, if you don’t click this your
data will not be re-set.
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator 7
9
