manualshive.com logo in svg

W&T Com-Server++, Manual

Share
Download
W&T Com-Server++ Manual Download Page 87

87

W&T

 

Packetizing serial datagrams

Subject to error and alteration

10�1�4 Fixed Packet Length

The Com-Server structures datagrams based on a fix number 
of characters. This means datagrams are not passed to the 
network until the set number of characters has been received.

n

  Activate this Packet Option (Telnet)

Activates the selected option for serial data reception.

n

  Fixed Packet Length 

Enter the desired number of characters.

1

The value set under F

ixed Packet Length

 is limited to  

the size of the MTU. The factory default setting for this 

is 560 bytes. In the menu path Setup System 

r 

Setup TCP/IP 

r 

MTU this can be extended to 1024 bytes.

Example
A serial device always replies to the polling from a master 
with a fixed datagram length of 30 bytes.

For correct packeting of this protocol the following settings 
must be made on the Com-Server:

Summary of Contents for Com-Server++





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands