W&T Com-Server++, Manual

Page: 211 / 228

211
W&T
Firmware update of the Com-Server
Subject to error and alteration
Highlight the desired Com-Server in the WuTility inventory list
with the right mouse button and choose
Properties .
Highlight the line Component#0
r
Platform Code and enter
the value 9.0 for the Com-+, 58665 in the correspon-
ding entry field For the Com-Server 3x Isolated, 58662 enter
the value
9.2 .
Manual initializing of the update process
For security reasons the Com-Server must first be initialized
for receiving new firmware. This initializing is done using Tel-
net or Web-Based-Management:
Telnet: SETUP System
r
Flash update
WBM: Logout page
r
Button Firmware update
1 A c t i v a t i n g u p d a t e m o d e c l o s e s a l l o p e n T C P
connections to the Com-Server. At the same time all
network services (including PING) are stopped. A return to
standard mode is only possible by sending firmware or perfor-
ming a hardware reset of the Com-Server.