W&H Lisa VA131-17 Instructions For Use Manual Download Page 26

Page: 26 / 140

Getting started

Icon

Label

Function

User
Management

Permits manage the users.

Add User

Administrator only. Adds a user.

Delete User

Administrator only. Deletes a user.

Reset user PIN
code

Administrator only. Resets a user PIN code.

Change your
PIN code

Changes the PIN code.

Options

Administrator only. Permits the following:

identify and save the operator who starts the
cycle and releases the load.

Protect with a password the cycle starts, the load
release and the label printing.

Label Printer

Optional, activated with an activation code.

Sets the maximum storage time of the wrapped
sterilized items.

Sets the automatic or manual printing of the
labels.

ACCESSORIES MENU FUNCTIONS

Icon

Label

Function

USB Pen
Drive

Opens the formatting page of the USB pen drive.

Format

Formats the USB pen drive.

Label
Printer

Optional, activated with an activation code. Selects the
label printer and sets the printout layout.

Local
Printer

Selects a printer connected to the sterilizer.

Shared
Printer

Selects a printer connected to another sterilizer
(connected via local network)

Calibration

Adjusts the label printer to the edge of the label.

Test

Prints a test label.

Printer

Selects the printer model connected to the sterilizer.

Special
Codes

Only for technical support. Saves the codes issued by the
manufacturer to activate special functions.

Summary of Contents for Lisa VA131-17













































































































































Search results

Summary of Contents for Lisa VA131-17

Reviews:

Related manuals for Lisa VA131-17

Brands by name

Popular brands

W&H Lisa VA131-17, Instructions For Use Manual

Search results

Summary of Contents for Lisa VA131-17

Reviews:

Related manuals for Lisa VA131-17

Brands by name

Popular brands