Walther Systemtechnik WLVCM, Operating Manual

Page: 30 / 37

8 Start of Operation and Parametering
Page 30 of 37
Operating Manual WLVCM-BA-10
EN
Configuration Tool WLVCM – Area Communication WLVCM
The area “Communication WLVCM“ (see also figure 6) offers you two different function ranges. On the
one hand, you are able to transfer the configured settings for application and heating parameters into
the WLVCM, or you can save these on a data carrier (see also chapter 8.5.1). On the other hand, you
can also test previously selected application parameters (see also chapter 8.5.2). Please use the
buttons “loading/saving“ and “parameter test“ for switching from one subsection to the other.
8.4.10 Loading / Saving
There are different functions in the area „loading/saving“. Figure 14 gives you an overview. The required
buttons and their function are explained in detail in table 10 below:
Figure 15 – Functions for Loading/Saving
Button Function
Write all sentences
➀
Transfers the complete configuration, i.e. all parameter sets and the
heating parameters from the configuration tool WLVCM into the
WLVCM module.
Read all sentences
➀
Transfers the complete configuration, i.e. all parameter sets and the
heating parameters from the WLVCM module into the WLVCM
configuration tool.
Write current sentence
➁
Transfers the parameters of the current configuration view on the left
screen half (application and heating parameters) into the WLVCM
module.
Read current sentence
➁
Reads the parameters of the current configuration view on the left
screen half, i.e. the heating parameters or the application parameters
from a selected set of parameters from the WLVCM module and
transfers them into the configuration tool WLVCM.
Save total config.
➂
Saves the complete configuration, i.e. all parameter sets and the
heating parameters from the configuration tool WLVCM onto a data
carrier.
Load total config.
➂
Loads a previously saved complete configuration from a data carrier
into the configuration tool WLVCM.
Table 10 - Buttons and functions for “Loading / Saving“