4.3 Splitting Wedge Height Lever
Adjust Splitting Wedge height based on the size of your logs.
•
For even-sized splits, align the center wedge with the center
of the log for four-way splits up to 22" (56 cm).
•
For smaller logs, fully lower the wedge for a two-way split.
01228
Fig. 9 –
Adjusting Wedge Height
A six-way wedge is available as an option.
4.4 Adjustable Log Stop Guide
Position the spring-hinged Log Stop Length Guide for desired
firewood length and consistent saw cuts. The indicator can be
set for log cuts from 14–24 inches with each hole 2 inches
(5 cm) apart. Cut lengths are indicated on the top side of the
guide.
1.
Remove the snapper pin from the guide base
2.
Move the guide to the desired length and replace the
snapper pin.
3.
Advance the log up the chute so the end of the log contacts
the spring-loaded guide rod.
01142
Fig. 10 –
Log Stop Guide
Controls
WP245 / WP275
3-Point Hitch Firewood Processor
20
