- 20 -
Side lead-through 2467
Assembly instructions
A side lead-through is installed in the side of the boat or in the transom. In sailboats it is recommended to install it in
the transom. The installation always requires a so-called goose neck. Make the necessary installation cut-outs and
spread a suitable sealing agent on both sides of the seal and on the screw holes. This will ensure that the
connection is waterproof.
Side lead-through
2467
Length difference of the pipes
The
1028
exhaust gas pipe must be 30-50 mm (1
3/16" - 1 31/32") longer than the
2045
inlet pipe.
This way the exhaust gas pipe will stay in place in
the lead-through more firmly. The measurement
depends on the overall length of the piping.
Side lead-through
2467
installed. The installation cut-out is
ø 50 mm (1 31/32") and the screw holes are 4 x ø 6 mm.
2467 package content
1 pcs
Side lead-through
1 pcs
Accessory bag
17679
Fastening screw TORX M5 x 40 mm
Nut M5
Washer 5,3 x 10 mm
Hose clamp 32/50 mm
Gasket 87/61x4mm
4 pcs
4 pcs
4 pcs
1 pcs
1 pcs
Summary of Contents for Spartan
