![background image](http://html2.mh-extra.com/html/wallas/spartan/spartan_installation-operation-and-service-instructions_3065905021.webp)
- 19 -
Closable lead-through 2460 (Viking water
only)
Assembly and detaching instructions
Closable lead-through
2460
Maintenance
To keep the seals from hardening, lubricate them
yearly with a heat-resistant petroleum jelly.
The cap of the closable lead-through must be detached for installation and seal maintenance by pressing the spring
indicated by the arrow in with, for instance, a screwdriver. Take care not to let the screwdriver slip as the spring is
very stiff. Hold the cap with your other hand when pressing in the spring. When the spring is down, pull the cap
gently out of the frame. When assembling the lead-through, ensure that the order of the parts is correct. Also make
sure that the spring goes in the correct hole in the cap. Otherwise, the lead-through cannot be closed.
Check that closable fitting is open before starting the device.
2460 package content
1 pcs
Closable lead-through
1 pcs
Accessory bag
17676
Fastening screw TORX M5X40
Nut M5
Washer M5
Hose binder 32 - 50 mm
Gasket
4 pcs
4 pcs
4 pcs
1 pcs
1 pcs
Summary of Contents for Spartan
