wallas Spartan, Installation, Operation And Service Instructions

Page: 30 / 109

- 28 -
Tank external filters 30015, 30016
Assembly instructions
Filters can be installed in a ø 5 or ø 6 mm plastic tubing or 1/8" metal pipe. Ensure that the fuel pipes are clean before
installing the filter. There must be no debris or impurities between the pump and the filter as they will clog the pump. The
filter type must be selected according to the operating conditions and country-specific requirements.
Air bubble
Fuel filter 30015
The filter is supplied with the device.
The filter can be installed directly in the 30011 tank connection by using a ø
6 mm rubber hose (1) and 10 mm hose binders (2). Alternatively, the filter
can be installed between two ø 5 mm fuel hoses with ø 5 mm rubber hose
(3) and ø 8 mm hose binders (4).
Install the filter in the direction of the arrow on it.
Fuel filter 30016 (accessory)
This filter is used in countries where a
metallic fuel transfer system is required. A
1/8" metal pipe is used for the installation.