wallas Spartan, Installation, Operation And Service Instructions

Page: 10 / 109

- 8 -
Fastening the devices
Floor mounting
The heater can be installed to the floor by using
"legs". Secure the device to a flat stable
surface which is not tilted more than 5 degrees
from the horizontal plane. While the device
might not break if it is temporarily tilted to a
steep angle (even for some hours) the burner
will not yield optimal performance if it is
constantly inclined. The "legs" and necessary
screws can be found from the accessory bag.
The heater (Spartan water or Viking water)
must be well fastened to withstand heeling of
vessel in all directions.
.
Ensure that there is enough space for the exhaust hose installation above the heater.
Measures Spartan water