wallas Spartan, Installation, Operation And Service Instructions

Page: 46 / 109

- 44 -
Connections tips:
1. Read from your mobile device user guide how connections and WiFi connections are managed in your device.
2. Make sure that local connections and WiFi are allowed in you mobile device (airplane mode is OFF).
3. Your mobile device is not in power save mode and location permission is given to Wallas application.
4. Check that heater is connected to power and Control panel is connected via cable to the heater.
5. Distance between Mobile device and Control Panel is not too long.
6. Control Panel is not in use by another person. Only one local connection is possible at a time.
7. If your mobile device already has connection to the heater it can not create new connection before the old connection
is removed from your device. In some phone models this has to be made manually. Remove "WALLAS OP" from your
phones paired short range wireless connection devices list (note there might be several OP pairings in mobile device
list, remove all) and restart short range wireless connection before new pairing is possible. This may be the case if
control panel pairing code only blinks fast and your mobile device is repeating the connection requests.
8. Change connection to other Wallas heater.
Close Wallas remote application.
Remove old connections from your mobile device short range wireless connection paired devices list. Restart
your devices short range wireless connection.
If there is no other users for new Wallas heater you can select Control panel menu
Settings/Connections/Remove all.
Restart application.
When/if "Change Device " link appears (30-60 sec) press the link.
Wait connection procedure to finalize.
9. In some phone models Pairing request will open in background info window. ( See your mobile devices user guide.)