66
Parameterizing
WAGO-SPEEDWAY 767
767-5201 TTL Incremental/SSI Encoder
Manual
Version 1.1.0
Table 38: Overview of adjustable parameters for the counter
Parameter
Description:
Multiple slope detect
Set the type of encoder evaluation here:
Single (1-fold) (positive edge)*
Only detects rising edges of the signal at the A track of the square wave
signal.
Quadruplicate (4-fold)
Detects both edges of the two square wave signals. (Cycle
quadruplication).
This field is only displayed when you have selected "Incremental
position encoder" as the encoder in the
Counter function
field.
Noise filter
Select the time for the noise filter here. When the noise filter is selected,
interference with the incremental encoder signal is filtered.
You have the following setting options:
Off*
1 µs
2 µs
4 µs
This field is only displayed when you have selected "Incremental
position encoder" as the encoder in the
Counter function
field.
* Factory default setting
** The last value is the value that is read on the contact prior to the occurrence
of the corresponding error. This can be, for example, an input value or a "simulation value".
