manualshive.com logo in svg

WAGO 750-494 Series, Manual

The WAGO 750-494 Series offers a comprehensive range of versatile programmable fieldbus couplers. Experience seamless integration with your automation systems by downloading the free user manual from our website. Explore the extensive features and specifications of this product to optimize your industrial processes. (Please download the manual for free from manualshive.com.)

Share
Download
background image

WAGO-I/O-SYSTEM 750 

Device Description 

27 

750-494 3-Phase Power Measurement Module 

 

 

Manual 

 

Version 1.2.0  

 

Pos: 50 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Zul assung en - Überschrift 2 @ 3\mod_1224055364109_21.docx @ 24030 @ 2 @ 1 

 

3.7 

Approvals 

Pos: 51 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebeschrei bung/Z ulassungen/Allgemei n/Z ulassungen Buskl emme 750- xxxx  Allgemein, Standardversi on und all e Vari anten - Einl eitung @ 3\mod_1233911570312_21.docx @ 27390 @  @ 1 

 

The following approvals have been granted to the basic version and all variants of 

750-494 I/O modules: 

Pos: 52 /All e Seri en (Allgemei ne Module)/Z ulassungen/Standardzulassungen/C E (Konformi tätskennzeichnung) @ 3\mod_1224494777421_21.docx @ 24276  @   @  1 

 

 

Conformity Marking 

 

Pos: 53 /All e Seri en (Allgemei ne Module)/Z ulassungen/Standardzulassungen/cU Lus (U L508) @ 3\mod_1224055013140_0.docx @ 24020  @   @  1 

 

 

UL508 

 

 

Pos: 54 /D okumentation allgemei n/Glieder ungselemente/---Leerabsatz-( 2Z)--- @ 3\mod_1224662755687_0.docx  @  24460 @   @ 1 

 

 

Pos: 55 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebeschrei bung/Z ulassungen/Ex/Z ulassungen Buskl emme 750- xxxx Ex, nur Standardversion - Einl eitung @ 9\mod_1281526321376_21.docx @ 63104 @  @ 1 

 

The following Ex approvals have been granted to the basic version of 750-494 I/O 

modules: 

Pos: 56.1 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Ex-Zul assungen/TÜV AT EX/TÜ V 07 AT EX 554086 X: I M 2 Ex d I M b II 3 G Ex nA IIC T 4 Gc II 3 D Ex tc IIIC T135°C Dc @ 14\mod_1361949753233_0.docx @ 113015 @  @ 1 

 

 

TÜV 07 ATEX 554086 X 
I M2 Ex d I Mb  

II 3 G Ex nA IIC T4 Gc  

II 3 D Ex tc IIIC T135°C Dc 

 

Pos: 56.2 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Ex-Zul assungen/IECEx (TÜV N or d)/IECEx TUN 09.0001 X: Ex d I M b Ex nA IIC  T4 Gc Ex tc IIIC  T 135°C @ 14\mod_1361950034299_0.docx @ 113019 @  @ 1 

 

 

IECEx TUN 09.0001 X 
Ex d I Mb  

Ex nA IIC T4 Gc  

Ex tc IIIC T135°C Dc 

 

Pos: 56.3 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Ex-Zul assungen/cU Lus/cU Lus (AN SI/ISA 12.12.01) Cl ass I, Di v2 ABCD T 4 @ 3\mod_1224054791812_0.docx  @  24014 @   @ 1 

 

 

C

UL

US

 

ANSI/ISA 12.12.01 

Class I, Div2 ABCD T4 

 

Pos: 56.4 /Dokumentation allgemei n/Glieder ungselemente/---Leerabsatz-(2Z)--- @ 3\mod_1224662755687_0.docx @ 24460 @  @ 1 

 

 

Pos: 57 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebeschrei bung/Z ulassungen/Ex/Z ulassungen Buskl emme 750- xxxx Ex, nur Vari ante /025-000 - Ei nlei tung @ 15\mod_1369653414923_21.docx @ 120540 @  @ 1 

 

The following Ex approvals have been granted to the variation 750-494/025-000: 

Pos: 58 /All e Seri en (Allgemei ne Module)/Z ulassungen/Ex-Z ulassungen/cU Lus/cU Lus (AN SI/ISA 12.12.01)  Class I, Di v2 ABCD T 4 @ 3\mod_1224054791812_0.docx  @  24014 @  @ 1 

 

 

C

UL

US

 

ANSI/ISA 12.12.01 

Class I, Div2 ABCD T4 

 

Pos: 59 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebeschrei bung/Z ulassungen/Schiff/Einl eitungssätze/Z ulassungen Busklemme 750- xxxx Schiff, nur aufgelistete Varianten -  Ei nleitung @ 14\mod_1364210936228_21.docx @ 115844 @  @ 1 

 

The following ship approvals have been granted to the variations 750-494 listed 

below: 

Pos: 60 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebeschrei bung/Z ulassungen/Schiff/Z ulassungstabellen/Z ulassungen Busklemme 750-0494 Schiff, T abellarische Ü bersicht @ 29\mod_1488891264464_0.docx @ 411284 @  @ 1 

 

Summary of Contents for 750-494 Series







































































































































Reviews:

No comments

Related manuals for 750-494 Series

B&G WR10 Quick Reference Manual preview
WR10
Brand: B&G Pages: 2
B&K SR10.1 Operation Manual preview
SR10.1
Brand: B&K Pages: 9
Lawler 911 Installation & Maintenance Manual preview
911
Brand: Lawler Pages: 6
Data Aire dap4 touch Supplement Manual preview
dap4 touch
Brand: Data Aire Pages: 28
Febco Master Series Installation Instructions Manual preview
Master Series
Brand: Febco Pages: 12
Game ready 550450 User Manual preview
550450
Brand: Game ready Pages: 21
VAMP 259 Operation And Configuration Instructions preview
259
Brand: VAMP Pages: 304
Harman Kardon OMNI 10 Quick Start Manual preview
OMNI 10
Brand: Harman Kardon Pages: 25
Uniss SR601 Operation Instructions Manual preview
SR601
Brand: Uniss Pages: 21
QUNDIS Q Water 5.5 Mounting And Installation Instructions preview
Q Water 5.5
Brand: QUNDIS Pages: 2
Z3 Technology Z3-DM8107-SDI-RPS User Manual preview
Z3-DM8107-SDI-RPS
Brand: Z3 Technology Pages: 73
Z-Wave Control4 Setup Manual preview
Control4
Brand: Z-Wave Pages: 14
Z-Wave.Me KFOB2 Quick Start preview
KFOB2
Brand: Z-Wave.Me Pages: 4
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Brand: Daikin Pages: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Brand: Daikin Pages: 26
Elby Designs ASM301-ADSR Diagrams preview
ASM301-ADSR
Brand: Elby Designs Pages: 4
turck TBEN-L 8IOL Series Instructions For Use Manual preview
TBEN-L 8IOL Series
Brand: turck Pages: 148
Bartec APEXpy 07-37A2-2111/ 520Series Operating Instructions Manual preview
APEXpy 07-37A2-2111/ 520Series
Brand: Bartec Pages: 98

Brands by name

Popular brands

Load more brands