2857-570/024-001
Planning
Product manual | Version: 2.0.0
53
3-Phase Power Measurement Module, 1 A
• Do not connect control components and control networks to an open network such as
the Internet or an office network.
WAGO recommends putting control components and control networks behind a fire-
wall.
• In the control components, close all ports and services not required by your application
to minimize the risk of cyber attacks and to enhance cybersecurity.
Only open the ports and services for the duration of the commissioning/configuration.
• Limit physical and electronic access to all automation components to authorized per-
sonnel only.
• To reduce the risk of unauthorized access to your system, change the default pass-
words during initial commissioning.
• To reduce the risk of unauthorized access to your system, regularly change the pass-
words used.
• To verify that the measures taken meet your security requirements, regularly perform
threat analyses.
• To restrict access to and control of individual products and networks, employ a “de-
fense-in-depth” mechanism in your system’s security configuration.
Additional document
•
&
White Paper Cybersecurity in Production Facilities
All the documentation and information is available at:
ü
5.2 Aids
You can obtain the WAGO Interface Configuration Software G2 FULL from
ü
You can obtain the WAGO-I/O-PRO software, as well as the associated product manual
with a detailed description of the software, from
ü
.
WAGO
e!COCKPIT
is available with Item No.
ü
For the trial version (30 days free of charge), you can register
ü
download link.
5.3 Requirements for Accessories
Note
Use only recommended memory cards!
Only use memory cards available from and recommended by WAGO, as these are speci-
fied for industrial applications under adverse environmental conditions and for use in this
device. Compatibility with other commercially available memory cards cannot be guaran-
teed.
A list of memory cards available from WAGO can be found in the appendix under Acces-
sories.
