2857-570/024-001
Provisions
Product manual | Version: 2.0.0
7
3-Phase Power Measurement Module, 1 A
Obligations of Installers/Operators
The installers and operators bear responsibility for the safety of an installation or a sys-
tem assembled with the product. The installer/operator is responsible for the proper in-
stallation and safety of the system. All laws, standards, guidelines, local regulations and
accepted technology standards and practices applicable at the time of installation, and
the instructions in the the products’ Instructions for Use, must be complied with. In addi-
tion, the installment requirements for licensing must be observed. In the event of non-
compliance, the product may not be operated within the scope of the approval.
1.2 Typographical Conventions
Number Notation
100
Decimals: Normal notation
0x64
Hexadecimals: C-notation
‘100’
‘0110.0100’
Binary: In single quotation marks
Nibbles separated by a period
Text Formatting
italic
Names of paths or files
bold
Menu items, entry or selection fields, emphasis
Code
Sections of program code
>
Selection of a menu point from a menu
“Value”
Value entries
[F5]
Identification of buttons or keys
Cross References / Links
Cross references/links to a topic in a document
Cross references / links to a separate document
ü
Cross references / links to a website
Cross references / links to an email address
Sequence of Action
ü
This symbol identifies a precondition.
1. Action step
2. Action step
ð
This symbol identifies an intermediate result.
ð
This symbol identifies the result of an action.
•
Individual action step
Lists
• Lists, first level
– Lists, second level
