Waeco AirCon ASC 6100G, Operating Manual

Page: 12 / 188

English
6.
Enter the hose length in centimetres.
7.
Press
ENTER
to confirm.
12.4 Selecting the language
1.
Press the cursor keys or .
2.
In the basic menu use the cursor keys or to select
Other selections
.
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4.
Use the cursor key to select
Service
.
5. Press ENTER to confirm.
6.
Enter the password
5264
.
7.
Use the cursor keys or to select the preferred language.
8.
Press
ENTER
to confirm.
9.
Press
STOP
.
The language chosen is active and the standby menu is displayed.
12.5 Entering the company data
The company data is printed out with every service log.
1.
In the basic menu use the cursor keys or to select
Other selections
.
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor key to select
Service
.
4. Press ENTER to confirm.
5. Enter the password
3282
.
The company data is shown in the third line of the display.
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the message
Enter company data
(01 to
05).
Use the cursor keys or to select the line of company data you want.
6. Use the keypad and the cursor keys to enter the data. To switch between upper and lower case, press the
key. To delete a character, briefly press the C key. To delete the current line, press and hold down the C
key.
7. Press ENTER to confirm.
8. Press STOP .
The set data is activated.
9. Press STOP again.
The standby menu is displayed.
10