Wacker Neuson RT82-SC3, Operator'S Manual

Page: 52 / 180

wc_tx003863gb_FM10.fm
52
Operation RT / RTx
4.11 Operating Status Indicator Codes
wc_gr010837
RT
RT
n
f
Ref.
Color and
appearance
Status Transmitter function Cause Remedy
f None Off Off
■
No power:
transmitter is
OFF.
■
No power:
battery is
discharged.
■
Turn transmitter
ON.
■
Check battery.
Green
(blinking
slowly) On (normal) Normal operation — —
Green
(steady) Setup mode Awaiting joystick
calibration.
■
See topic
Calibrating the
Joysticks .
See topic Calibrating
the Joysticks .
Green
(blinking
rapidly) Calibration
mode Transmitter is in
calibration mode, and
the calibration
procedure can be
performed.
■
See Calibrating
the Joysticks .
See Calibrating the
Joysticks .
Red to green
to yellow
(cycling) Most recent
joystick
calibration
had an error. Machine operation may
still be possible
depending on amount
of usable data
available.
■
Joystick(s)
incorrectly
calibrated.
Middle position of
joystick(s) is not
being detected.
■
Recalibrate
joysticks.
Red and
green
(alternating) Under-
voltage fault Weak signal
communication.
■
Battery charge is
low.
■
Recharge or
replace battery.
Red
(flashing
every
second) Under-
voltage fault Transmission has
stopped. Transmitter
unable to control the
machine.
■
Discharged
battery.
■
Recharge or
replace battery.
Red
(blinking
rapidly) Joystick
calibration is
required Transmitter unable to
control the machine.
■
Joysticks not
calibrated
■
Calibrate joysticks.
■
If calibration does
not solve the
problem, contact
Wacker Neuson
Product Support.