Wachs SDB 206, User Manual, Page: 45 / 76

Small Diameter Beveler: Setup & Operation
E.H. Wachs Part No. 56-MAN-01, Rev. B 43
Figure 3-25.
17. Rotate the axial feed handle assembly clockwise until the tool bit just touches the desired
surface to be faced.
18. Again rotate the tool slide starwheel nut, raising the bit just above the surface to be faced.
19. Using the infeed indice gauge, rotate the axial feed handles clockwise until the desired depth of
cut is attained. (Figure 3-26)
Figure 3-26.