Wachs SDB 206, User Manual, Page: 4 / 76

SDB 206 and FF 313
2 Part No. 56-MAN-01, Rev. B E.H. Wachs
Rotating Heads and Mandrels
The rotating head is equipped with four tool holders that allow up to four form tools to be used
simultaneously. You can face, bevel, and counterbore in one machining operation. Once you have
configured the tooling for a particular pipe size, you can easily move the machine from one pipe to
the next with no additional setup required.
Three different sized rotating heads and four styles of man drels are available with the SDB 206.
The three rotating heads are shown in Figure 1-2. The standard mandrel is shown in Figure 1-3.
Standard head (56-005-00)
Large 8" head
(56-076-00)
Small head (56-004-00)
Figure 1-2. The photo shows the three rotating heads available with the SDB 206.
Chuck body
Chuck leg
Feed threads
Drawbar nut
Figure 1-3. The photo shows the SDB 206 mandrel.