Wachs SDB 206, User Manual, Page: 29 / 76

Small Diameter Beveler: Setup & Operation
E.H. Wachs Part No. 56-MAN-01, Rev. B 27
When the threads contact the inside of the feed nut, turn it clockwise until the draw bar nut is
completely exposed. Be certain to align the key in the end cap to the key way of the mandrel.
Use the two locking set screws located on either side of the machine body to apply tension to the
machine and mast (Figure 3-2). This will remove any play, and pre-load the machine to the mast.
Figure 3-2.