Wachs SDB 206, User Manual, Page: 35 / 76

Small Diameter Beveler: Setup & Operation
E.H. Wachs Part No. 56-MAN-01, Rev. B 33
Flange Facing Conversion
Setup & operation
1. Measure the flange I.D. Refer to mandrel leg extension chart. To select the mandrel adaptor and
leg Set required to mount in flange I.D.
2. Insert the solid leg set # 56-135-12 in the mandrel head POINT SIDE DOWN (Figure 3-10)
notE
56-135-12 solid leg set is required when installing the 56-144-00 adapter cone onto
the mandrel head.
Figure 3-10.