Wachs SDB 206, User Manual, Page: 23 / 76

Safety: Safety Labels
E.H. Wachs Part No. 56-MAN-01, Rev. B 21
For additional information on eye and face protection, refer to Federal OSHA regulations, 29 Code
of Federal Regula tions, Section 1910.133., Eye and Face Protection and American National
Standards Institute, ANSI Z87.1, Occu pational and Educational Eye and Face Protection.
Hearing Protection
This equipment can produce noise levels above 80 dB. Hearing protection is required when
operating the equip ment. The operation of other tools and equipment in the area, reflective
surfaces, process noises, and resonant struc tures can increase the noise level in the area.
For additional information on hearing protection, refer to Federal OSHA regulations, 29 Code of
Federal Regulations, Section 1910.95, Occupational Noise Exposure and ANSI S12.6 Hearing
Protectors.
s
afety
l
abels
The following safety labels are provided on the SDB 206/FF 313. If any of these labels is damaged
or missing, replace it immediately. See the section on ordering informa tion at the end of this
manual.
Figure 2-1. The Keep Hands Clear warning label is on the bearing housing of the SDB 206/
FF 313. (Part no. 66-147-00.)