Wachs SDB 206, User Manual, Page: 34 / 76

SDB 206 and FF 313
32 Part No. 56-MAN-01, Rev. B E.H. Wachs
4. Mount the Flange Facer tool slide by tightening the four-5/16-18 x 5/8" stripper bolts (Figure
3-8).
Figure 3-8.
5. Install the Flange Facing Mandrel into the flange I.D. using the alignment fixture to insure
proper squareness to flange. Once the mandrel has been properly aligned, mount the machine
body to the mandrel (Figure 3-9).
Figure 3-9.